鋁門窗組角機LMB-120 Single Point Crimping Machine 鋁門窗單頭組角機主要用于角碼結構的平開門窗 45 °接縫的擠壓聯結。 組角前，在兩個被聯結的型材腔內放一公用角碼，定位夾緊后，兩個液壓驅動的沖頭強力沖向角碼的凹槽處，使型材外壁產生性的冷變形。將兩型材接縫擠壓，使聯結具有螺釘或其它聯接方法所不具有的高強度、率、高精度。 The machine is mainly used for extrusion and connection of 45 ° seam casement window with angle joint structure. Before operating, place a cornerbrace in cavities of two profiles to be connected. After locating and clamping,the two hydraulic driven punching blocks punch towards the flute of cornerbrace, making the outer wall of the profile permanently colddeformed. Extrude the seam of two profiles and make strength, efficiency and precision of the connection higher than using any other means for connection. 輸入電源 Power supply 380V 50Hz 油泵電機 Oil pump motor 1.5kw 1400r/min 耗氣量 Air consumption 50L /min 油路系統壓力 Oil circuit system pressure 16Mpa 沖壓力 Impact pressure 44KN 沖頭調整行程 Impact head adjustment 25mm 沖頭沖鉚行程 Impact head stroke 45mm 沖頭高度調整范圍 Impact head height adjustment 80mm 定位塊行程量 Locating block stroke 70mm 定位塊行程調整范圍 Impact block stroke 80mm 氣路系統壓力 Locating block stroke adjustment 0.4~0.6(Mpa) 型材較大高度 Max height 120mm 機床外型尺寸 Overall dimension 830x1000x1200(mm)