TX1透亮型拋光粉 Bright type polishing powder

品牌:凈魅

 透亮型拋光粉呈松散黃色粉末，高表面活性，環保安全。適用于大理石，石灰石等含鈣量多的石材，翻新結晶后的板材表面光感通透油潤，色澤飽滿有厚度，光澤度高，板面硬度提高，耐磨損，耐粉化不易退光，含熱塑性成膜樹脂對細小毛孔和疏松表面有填充功能。

適用范圍：天然大理石(米黃系列、莎安娜、黃洞石、啡網等)

使用方法：

1.將不平整的地面研磨至1500#以上, 把TX01透亮型拋光粉倒于地上，加上比例清水。用晶面處理機配百潔墊將拋光粉磨成漿狀，來回約12-16頻次。待石材表面出光后刮去表面多余粉漿，根據環境特質可用清水沖洗干凈石材表面然后吸干。

2.如需更高光澤可加少量多功能結晶膏配合百潔墊重新拋磨，進行最后的潤色處理。可加大晶面硬度和光澤度。經過晶面處理的大理石表面光滑如新，光澤度可以達到90度以上。

包裝規格：5KG/桶；20KG/桶

Translucent type polishing powder is a loose yellow powder, high surface activity, environmental safety. Suitable for marble, limestone and other more calcium stone renovation crystallization plate surface after the light-sensitive transparent oily, full color, thickness, gloss, plate surface hardness, wear resistance, easy chalking back light, comprising a thermoplastic film-forming resin on the surface of fine pores and loose-fill feature.

Scope: Natural marble (beige series, ROYAL, yellow travertine, Emperador, etc.)

Instructions:

1. The uneven floors above ground to # 1500, the TX01 translucent type polishing powder fell on the ground, with the proportion of water. Crystal plane processor equipped with scouring pad grinding to polishing slurry back and forth for about 12-16 frequency. Until the stone surface of the rear surface of the light scrape excess slip, according to the environmental characteristics of the stone surface clean and rinse with water and then dry.

2. For a higher gloss can add a small amount of cream with crystallized multifunction scouring pad re-polishing, the final touches processing. Can increase the crystal surface hardness and gloss. Marble crystal surface treatment after the surface smooth as new, gloss up to 90 degrees.

Precautions:

1. Suitable placed in a cool ventilated place, avoid sun exposure.

2. Avoid contact with skin and eyes, away from children's reach.