產品分類 更多>>
隔膜閥技術參數：
Technical Data of Diaphragm Valve:
較大工作壓力：10bar
Max Pressure:10bar
驅動方式：手動
Operation Type: Manual operation
較大工作溫度：150℃
Max Temperature: 150℃
適用介質：EPDM-蒸汽
PTFE-水、酒精、油、燃料、蒸汽、中性氣體或液體、有機溶劑、酸堿溶液等
Applicable Media: EPDM-Steam
PTFE- Water, Alcohol, Oil, Fuel, Steam, Neutral gas or liquid, Organic solvent, Acid and Lye
連接方式：對焊（G/ DIN/ISO）
快裝
Connection Joint: Butt-welded Ended（G/ DIN/ISO）
Tri-clamp Ended
特點：
1．彈性密封的開閉件，閥體密封堰槽采用弧形設計結構，確保沒有內漏；
1. Elastic sealing/ packing and arc weir seal design of valve body insure without leak;
2．流線型的流道，使得阻力減小；
2. Streamline valve design can decrease the friction and resistance of valve;
3．閥體與蓋被中間隔膜隔開，使得隔膜上方的閥蓋，閥桿等零件不受介質侵蝕；
3. Valve body and bonnet are separated by diaphragms in order to prevent valve parts, such as bonnets and steam from corrasion;
4．隔膜可更換，維護費用低
4. Diaphragms can be changed in order to low the maintenance cost;
5．目測式位置顯示開關狀態
5. Seeable device can indicate the on-of state;
6．多種表面拋光技術，無死角，在正常位置下無殘留。
6. Advanced polishing process insures be sanitary, without dead angle and residue;
7．結構緊湊，適用與狹小的空間。
7. Compact construction is suitable for valve installation with small space;
8．膜片符合DFA及UPS等機構對藥品和食品行業規定的安全標準。
8. Diaphragms satisfy all the sanitary standards and conditions of DFA and UPS.
