FZ-9802B 包裝跌落試驗機 PACKING DROP TESTER 本機專門測試產品包裝后，受到墜落時之受損情況，及評估電子組件在搬運時，遭受落下之耐沖擊強度。本機采用電磁控制，試料能瞬間自由落下，包裝容器之棱、角、面均可測試。 This machine is designed specially for testing the damage of those packaged products which fall down to the ground，and it can evaluate the impact-resistance strength of electronic assembly which falls down during transporation。This machine is controlled by an electromagnetic device which can drop down the specimen freely and immediately。All the rhombohedron，angle，face of the package container can be tested。 跌落高度 Drop height range 350mm ~ 2000mm 試件較大重量 Load weight 約 250kg 試件較大尺寸 Test space 2200mm x 1600mm 沖擊面板尺寸 Base area 3300mm x 1800mm 上升、下降速度 Up-down speed 150mm / min 墜落方式 Method of drop 對面墜落、對棱墜落、對角墜落 墜落控制 Control of drop 電磁離合方式 體積 Dimension 3300 x 1800 x 2100mm 重量 Weight 約 2500kg 電源 Power AC220V / 50Hz